Loop-IP6416 IP-IMUX

  • 1U height, ETSI unit full front access) or ANSI unit front and back access)
  • Rack mount, wall mount, and stand-alone
  • WAN ports with 4 hot swappable slots
  • 4 E1/T1 ports per card; max up to 16 E1/T1 port per system
  • E1/T1 is software configurable
  • Tributary ports Fixed on main board Up to 4 10/100 Fast Ethernet(FE)
  • Optional daughter card fixed on panel
  • 1 Optical FE
  • 1 Optical FE (SFP housing)
  • 2 combo Gigabit Ethernet (GbE)* with 2 RJ45 and 2SFP housing
  • Ethernet Function
  • 802.1q VLAN
  • 802.1d bridging with MAC learning ( up to 4096 entry)
  • CoS/QoS
  • 4 priority queue
  • Packet classification based on the 802.1p priority or DSCP (DiffServ).
  • Strictly Priority or Weighted Round-Robin (WRR)
  • Rate limiting
  • 1 DTE(V.36) and 1 asynchronous RS232*. DTE optional interfaces can be either V.36/RS449, V.35 compatible, EIA530, or X.21
  • Power modules
  • Hot-swappable plug-in modules, dual for redundancy
  • -48 Vdc (-36 to -75 Vdc)
  • AC plug-in module(100 to 240 Vac) (ANSI only)
  • AC and DC(coexistent) fixed module(100 to 240 Vac and -36 to -75 Vdc)
  • WAN link with virtually concatenated n x E1/T1, where n can be 1 to 16
  • Encapsulation protocol: GFP, LAPS and PPP(without LCP)
  • Differential delay, up to 256ms for E1 and 384ms for T1
  • VLAN packet transparency
  • Packet size up to 12,000 bytes
  • IEEE 802.1ad Q-in-Q
  • Timing sources for primary and secondary clocks are anyone of E1/T1, DTE*, internal, external (manufacture option)
  • Alarm relay
  • Firmware download to local unit and remote unit
  • Management port and interface
  • LCD with keypad on ANSI front panel
  • Console port, VT100 menu-driven
  • SNMP port
  • SNMPv1
  • Telnet via SNMP port
  • LoopView GUI EMS
  • Inband management in traffic bandwidth
  • RoHS Compliant

The Loop-IP6416 IP Inverse Mux is a media converter. It allows service providers to offer Ethernet services over the
existing copper, optical, or microwave infrastructure carrying the E1/T1 network. Up to 16 E1/T1 lines can be enabled and
concatenated to form a single channel. Ethernet frames are mapped into this single concatenated channel.
The Loop-IP6416 offers up to 16 E1/T1 ports with an LED for each port. It has automatic E1/T1 channel failure detection
and can reassign the number of E1/T1 channels transporting Ethernet traffic. For example, if there are 16 E1s configured
for 10/100 Ethernet traffic transport, and one E1 fails during service, the other 15 will pick up the entire load. This
minimizes the loss of IP packets.
Several power options exist including dual DC, front/back AC and hybrid AC/DC. The Loop-IP6416 supports a console port,
which allows users to execute in-service diagnostics and fault isolation from a local or remote terminal. The Loop-IP6416
also allows remote site connection to Telnet via the Ethernet port. An Alarm Cut-Off(ACO) button is located on the panel.

Ordering Information

No Special Codes required.

Enter and submit form and we will contact you straight away:

 Please specify the Brand and Model Number:

* Brand & Model
* Product type (modem, router, etc.)
Part # (if available):

 *I am the End User Reseller (tax-ID required at time of purchase)

Describe your application requirements with as much detail as possible:   

  Contact  Information - Our Privacy Policy is: We do not sell, trade, give or share information
   provided to us to anyone.

    First Name: Last Name: Title: 
    Company:   Mail Stop:   

    City:            State: Postal Code:  Country:
    Telephone: FAX:   
    Email:         URL:   

Enter the code below as it is shown:



| Home | Products Search | Order | email |

National Data Mux. - All products, logo's and brand names mentioned are trademarks or registered trademarks of their respective owners.