Loop-C5600 is a high density
Multi-Services Shelf designed to accept a mix of Loop series rack
This includes Loop-H3308-R and future products etc.
The C5600 provides one common controller to manage 15 plug-in cards.
For 2 or 4 pairs G.SHDSL, Loop-H3308-R consists of two boards, one
to plug in the front containing the
Ethernet connectors, and one to plug in the back containing the
G.SHDSL connectors. For 8 pair
G.SHDSL, two G.SHDSL connector boards plug in the back.
Loop-C5600 Integral Access Shelf supports local configuration and
diagnostics by using a local or remote
terminal. Each rack position can be individually addressed and the
type of plug-in identified. This
enables users to execute in-service diagnostics and fault isolation.
Using SNMP or Telnet connection on the
shared controller card of the rack unit, users can remotely control
and diagnose Loop rack cards from a
centralized location. In addition to commercial management systems,
a graphical user interface (GUI)
based network management system, LoopView and LoopView Plus, are
also available from Loop.
For a complete system, order one Multi-Services Shelf, one controller, one or two power modules and as manyplug-in types as needed up to 15.To specify options, choose from list below: Note: RoHS compliant units are identified by the letter G appearing immediately at the end of ordering code.
Enter and submit form and we will contact you
LOOP-C5600 MULTI-SERVICES SHELF PRODUCT SPECIFICATIONS
Console port Electrical: RS232, DCE User interface: Menu driven VT-100 Connector: DB9, female
SNMP port 2 ports 10/100BaseT FE (IEEE 802.3u) SNMP v1 Telnet with Secure Shell (SSH), up to 5 telnet sessions
Access Control List (ACL) Connector: RJ45
SNMP Standard MIB RFC 1157 SNMP v1 RFC 1155 Structure and Identification of Management Information RFC 1212 Concise MIB Definition RFC 1213 MIB II RFC 3276 SHDSL MIB
Alarm History Alarm type: Alm Cut Off, Overheat, Login and Logout, SNMP-1 Link Up, SNMP-2 Link Up, SNMP-1 Link Down, SNMP-2 Link Down, Card In, Card Out, Card Type Mismatch, Card Port Number Mismatch, Card Fail
Alarm Queue Contains up to 500 alarm records which record the latest alarm type, alarm severity , and date & time
Alarm Control Alarm relay, fuse relay NO, COM, NC Alarm cut off ACO button
Front Panel-Controller Card
LED PWR, ACT, ALM, 10/100 LINK/ACT
DC Power -36 to -75 Vdc, 200 Watt maximum, dual for redundancy
Input Range 88 to 132 Vac/176 to 264 Vac auto sensing Output Voltage 48 Vdc ± 1% Output Current 5.0 A ± 1% Output Power 240 Watt max. Dimensions For C5600-CHA: 433 x 222 x 310.4 mm (W x H x D), 5U height
Physical and Environmental
For C5600-CHB: 433 x 222 x 341.4 mm (W x H x D), 5U height Temperature 0-50°C Humidity 0-95% RH (non-condensing) Mounting Desk-top stackable,19/23 inch rack mountable, accessories included Number of slots 16
Note: 15 line card slots and 1 controller slot
Loop-H3308-R Ethernet over Bonded G.SHDSL.bis Line rate 8K+N x 64 Kbps, N =1 to 89 (5.704 Mbps) Controller Card 4 Watt H3308-R 4 pairs G.SHDSL.bis with sealing current 12.5 Watt H3308-R 8 pairs G.SHDSL.bis with sealing current 18.5 Watt EMC FCC Part 15 Subpart B, Class A, EN 55022, Class A, EN 55024 Safety IEC 60950-1/EN 60950-1
Standards ComplianceIEEE 802.3 10/100 BaseT